Rinnai Tankless Water Heater Installation
Authorized Rinnai installer in Northern Virginia. We size the unit, check gas, vent and drain, and price every line before work starts.
★ 4.9 on Google · 59 reviews · Authorized Rinnai installer · Arlington, VA
- The tankless unitModel, gas input and flow rate, sized to the taps you run at once
- Gas line and meter checkAn upgrade is its own line if the current pipe cannot carry the unit
- Vent kit and wall penetrationIndoor units vent to the outside
- Condensate drain and neutralizerCondensing models
- Isolation valvesSo the unit can be flushed
- Electrical outletThe unit needs power for its controls and fan
- Remove and haul away the old tankDrained and taken with us
- Permit and inspectionWhere the job requires one
We check the gas line, vent route and drain on the site visit, before we price the job.
Which Rinnai?
Rinnai's current residential range splits into condensing units (higher efficiency, need a condensate drain) and non-condensing units (simpler venting needs, lower efficiency), each with and without a built-in recirculation pump.
Recirculation keeps hot water close to the far taps, so a bathroom at the end of a long run gets hot water sooner. Whether it is worth it depends on the length of your pipe runs, which we look at on the visit.
| Type | Highest listed UEF | Recirculation | |
|---|---|---|---|
| SENSEI RX | Condensing | 0.98 | Smart-Circ intelligent recirculation |
| SENSEI RXP | Condensing | 0.98 | Built-in pump |
| RUS | Condensing | 0.90 | Wi-Fi module sold separately |
| RUCS | Condensing | 0.85 | Wi-Fi module sold separately |
| RE | Non-condensing | 0.81 | Wi-Fi module sold separately |
| REP | Non-condensing | 0.82 | Built-in pump |
What a Rinnai install includes
The Rinnai unit plus the gas line check, the vent kit, the condensate drain on condensing models, isolation valves for flushing and an outlet. Each is a line on the estimate.
Flushing and upkeep
A tankless unit is flushed through its isolation valves to clear scale from the heat exchanger. How often depends on your water hardness and use.
Northern Virginia water ranges from moderately hard to hard depending on the supplier, and scale builds faster in a heat exchanger than in a tank. Your area page lists your supplier's published hardness.
How a replacement works
- Call or send the form with what you have now: fuel, tank size and age.
- We look at the space, the gas or electrical hookup, the vent and the water lines.
- You get one free, itemized estimate, with the model named and every line priced.
- Install day: the old heater is drained, disconnected and hauled away, the new one is set, connected and tested.
- We show you the shutoff, the relief valve and how to drain or flush the new unit.
Where we install
Northern Virginia, from our base in Arlington. Each area page lists the local permit office, water supplier and what they mean for your water heater.
Questions homeowners ask
Get an itemized water heater estimate
Tell us what you have now and what you want next. The estimate is free and itemized.
Arlington, Alexandria, Fairfax, Falls Church and Loudoun